-40%

Nasal Mask

Philips Respironics Dreamwear Nasal Mask with Headgear

Brand: Philips

4.93

(14 reviews)

This minimal contact mask eliminates bulk, allowing users the freedom of movement throughout the night without leaving red marks or sores on noses.

₹5,090.00₹8,470.00

Quantity

Philips Respironics Dreamwear Nasal Mask with Headgear quantity

Add to cart

Sku:

PH-M-NM-4000

Brand:: Philips

Description

Philips Respironics Dreamwear Nasal Mask with Headgear

The Philips Respironics DreamWear Nasal could be a nasal mask with a singular and borderline frame structure that rests a cushion below the nostrils rather than covering the complete nose. Its soft, versatile polymer frame and material wraps offer a victim on the cheek. DreamWear users desire they’re not carrying a mask in the least.

Philips Respironics DreamWear Nasal Mask Features and Benefits:

• Fewer Mask Leaks in Any Sleeping Position
• Top-of-the-Head Hose Connection
• Open Line of Sight
• Multi-Size Frames and Cushions

The DreamWear Nasal Mask is Ideal For:

• Active Sleepers
• Side Sleepers
• Stomach Sleepers
• If You Breathe Through Your Nose
• If You Have Sensitive Skin
• If You Wear Glasses
• If You Are Claustrophobic
• If You Watch T.V. or Read Before Bed

Suggested Replacement Schedule:

The silicone nasal cradle cushion should be replaced once every three to six months.

Philips Respironics Dreamwear Nasal Mask with Headgear Package includes:

• Mask Frame
• 4 size cushions (Small, Medium, Medium-Wide, and Large)
• Fabric Wraps
• Headgear

Philips Respironics Dreamwear Nasal Mask with Headgear FAQs:

Where are DreamWear Exhalation Ports Located?

The DreamWear Nasal Mask has 2 exhalation ports designed into the device. Air is discharged through little holes settled on the elbow of the DreamWear mask, that is placed at the highest of the top. A second exhalation port is found on the gel pillow of the nasal mask. A little rectangular slit found on the front exterior of the DreamWear cushion permits air to unharness from the nostrils.

How to remove the mask?

The DreamWear Nasal Mask uses a quick-release swivel to permit users to simply and speedily take away the mask from the hose once required. to make sure the mask elbow and swivel are firmly connected to be used throughout the night, listen for a clicking sound once putting in.

Please Note: it’s useful to allow the hose some slack to form a little variety of motion which is able to facilitate scale back tug on the mask and maintain the distinctive style of the DreamWear mask.

What Can I Do if my DreamWear Mask Leaks?

f your DreamWear mask is leaky there are some belongings you will do:

1. Check all the connections on the mask and make sure they’re connected properly. A faulty connection can cause air leaks.
2. Try adjusting the cushion under the nose, to see if it can be fixed by changing the position slightly. Sometimes this will work too.
3. Adjust the headgear straps so the fit is tight enough to support a good seal.

What to Do if My DreamWear Mask is Whistling?

Sometimes the DreamWear mask whistling is caused by the sheet or the blanket being too near to the air exhaust on the DreamWear mask. The air whistling is fastened by the propulsion of the sheet off from the mask. The whistling sound also can happen once the seal breaks. strive to adjust the headgear straps to urge improved work and emplacement of the cushion around the nose.

The silicone nasal cradle cushion should be replaced once every three to six months.

Can You Suggest Cleaning Tips For Dreamwear Masks?

1. Separate the nasal cushion from the frame.
2. Run lukewarm soapy water through the frame.
3. Rinse the frame with lukewarm water.
4. Gently scrub the nasal cushion with mild soap and water, making sure to remove all debris that may have collected.
5. Rinse the cushion with lukewarm water.
6. Set the frame and cushion aside to air dry.

What is included inside Philips Respironics Dreamwear Nasal Mask with Headgear Package?

Philips Respironics Dreamwear Nasal Mask with Headgear Package includes:

• Mask Frame
• 4 size cushions (Small, Medium, Medium-Wide, and Large)
• Fabric Wraps
• Headgear

Where is the Cushion Size Located?

The DreamWear cushion size is printed in black letters on the front of the cushion, beside the arrow which indicates the frame and cushion connection points. The cushion is available in four sizes: small, medium, medium wide, and large.

Where is the Frame Size Located?

To find the dimensions of the DreamWear Nasal Mask Frame, find the elbow at the highest of the unit. simply on top of the elbow, gray letters square measure imprinted on the frame to point to the dimensions. The letters “SM” represent a size tiny, “MED” represent a size Medium, and “LG” represent a size massively.

Additional information